Featured Projects In Los Angeles, CA

These are foam and flat roofs Vision Roof Services has finished and has permission to publish. 2 sit in Los Angeles: a 90,000 sq ft spray foam roof in an LA industrial zone, and work for Paramount Studios on Melrose Avenue. The other 4 are in Orange County and the high desert. Each one comes with a note on what the same job would need under Los Angeles code, so an LA owner or property manager can tell which project matches their building.

If you own or manage a commercial roof in LA, book a Free Roof Health Check. We measure, photograph and send a written report in 24-72 hours.

  • About 7,500 roofing jobs completed to date

  • 60 roofers, 12 of them General Coatings certified foam applicators

  • Since 1992: CSLB C-39 #651509, issued 07/31/1992

  • 4.8 stars on 42 Google ratings (Palm Desert profile)

Featured roofing projects in Los Angeles, CA

Both LA projects are commercial, both are low-slope, and both sit on buildings that kept running during the work. That is the type of job we want in Los Angeles: warehouses, studios, offices and HOA-managed flat roofs where a tear-off would shut something down.

Drone view of a 90,000 sq ft spray foam roof on an industrial building in Los Angeles

90,000 sq ft spray foam roof, industrial zone, Los Angeles

Drone photo from the job. Vision Roof Services project photo.

A custom polyurethane spray foam roof over about 90,000 square feet of warehouse and industrial roof in Los Angeles. The client is the property owner. That is about 1.5 American football fields, end zones included, sprayed as 1 continuous membrane with no lap seams to open up later.

Why it matters for your building: a roof this size in the City of Los Angeles also falls under the city's Existing Buildings Energy and Water Efficiency (EBEWE) ordinance, which covers private buildings of 20,000 sq ft or more. Every 5 years those buildings owe an audit and retro-commissioning report, scheduled by the last digit of the LADBS Building ID. IDs ending in 0 or 1 are due December 1, 2026. IDs ending in 2 or 3 are due December 1, 2027. A building with no central cooling can claim an exemption by completing 4 of 6 listed measures, and a cool roof is one of the 6. The proof LADBS asks for is a finaled permit number dated within the 5 years before the due date. So the roof permit on a job like this one does double duty. You can check your building's EBEWE status on the LADBS lookup before you schedule anything.

We sprayed it as a recover rather than a tear-off. On a roof this size, that choice is most of the budget. See the cost chart further down.

See the full photo set for this project

Paramount Studios, 5555 Melrose Avenue, Hollywood

Paramount Studios is a Vision Roof Services commercial client, and the lot at 5555 Melrose Avenue (90038) sits in the part of Los Angeles that state energy maps put in Climate Zone 9. Studio lots carry a problem most commercial roofs do not: a production schedule booked weeks out, under a roof that cannot drip on a set. Roof work on a lot like this has to be planned around shoot days, with the roof left watertight at the end of every shift.

Zone 9 changes the insulation math. A full roof replacement on a conditioned building there has to reach R-23 continuous insulation under Title 24 Table 141.0-C. A recover gets an exception: new insulation of at least R-10 above the deck. Spray foam carries about R-5.5 to R-6.5 per inch, so the R-10 line lands at roughly 1.5 to 1.8 inches of foam. That gap between R-10 and R-23 is one reason a studio, warehouse or office owner in Hollywood should price a recover before a replacement.

For a reference on your own roof type, ask on the Health Check call and we will match you to the closest job on file, LA or not. For the service itself, start with commercial roofing in Los Angeles.

Southern California projects and what each one means for an LA roof

The 4 projects below are outside Los Angeles, and we label them that way. Each one still answers a question LA owners ask us: can you keep my building open, can you handle every building on a campus, does foam make sense on a storage building, and will it hold up on a house in hard sun. Under each card is the LA rule that would change the job.

Invisible House in Joshua Tree, a custom home with a polyurethane spray foam roof

Invisible House, Joshua Tree (residential)

Invisible House, Joshua Tree. Vision Roof Services project photo.

A polyurethane spray foam roof on a 5,500 sq ft custom residence in the high desert. Joshua Tree has harder UV and a wider day-night temperature swing than anywhere in the LA basin, which makes this the toughest exposure on the page.

An LA hillside version of this house would face 2 rules the desert job did not. First, the City of LA residential cool roof table for a low-slope roof calls for 0.65 aged reflectance, 0.85 emittance and SRI 78. Second, a house in a Very High Fire Hazard Severity Zone needs a Class A roof assembly. Under General Coatings' ICC-ES evaluation report ESR-3239, foam over a noncombustible deck rates Class A at 1 to 2 inches. Foam over plain 15/32-inch plywood rates Class B. To reach Class A on a wood deck, the assembly adds a 1/4-inch gypsum cover board under the foam. That detail decides whether a hillside foam roof passes, and it belongs in the bid before the price does.

See the Invisible House project

Most of our LA work is commercial. For homes, see residential roofing in Los Angeles.

Aerial view of a business complex with commercial buildings

Business complex, every building foamed (Orange County)

Aerial photo of the complex. Vision Roof Services project photo.

A multi-tenant business complex where every building on the property got a foam roof, about 100,000 sq ft in total. Tenants stayed in business through the job. This is the reference we hand to property managers who ask if a foam crew can work an occupied property one building at a time without closing it.

For LA, the lesson is sequencing. Foam and coating both need a dry surface, so crews work building by building around the weather and the tenants. Downtown LA gets about 14.25 inches of rain in a normal year, so the dry window is long. It narrows this winter. NOAA's Climate Prediction Center issued an El Niño Advisory on October 8, 2026 and puts a strong to very strong event as likely through early 2027. Campus jobs scheduled now finish before the wettest months. Jobs scheduled in January wait on the weather.

See the business complex project

LifeStorage self-storage building in Orange County with a spray foam roof and reflective coating

LifeStorage facility (Orange County)

LifeStorage facility, Orange County. Vision Roof Services project photo.

A low-slope storage roof recovered with spray foam and a reflective coating. The owner told us cooling costs went down afterward. The building was not metered before and after, so we do not publish a percentage, and you should be wary of any roofer who quotes you one without a meter behind it.

Storage buildings are where LA code gets uneven. Title 24's cool roof rule applies to conditioned space, so a fully unconditioned storage building can fall outside it. The LA Green Building Code table lists no matching exemption. Before anyone tells you a storage roof can skip the reflective coating spec in the City of LA, get that answer from LADBS in writing. We ask on every storage bid.

See the storage facility project

Yamaha office roof in Buena Park after spray foam and granulated cool roof coating

Yamaha office, Buena Park (Orange County)

Before and after, Yamaha office, Buena Park. Vision Roof Services project photos.

A full commercial spray polyurethane foam restoration on a Yamaha office facility, a 5,000 sq ft property, for its property manager. Scope, in the order the crew did it:

  1. Removed the deteriorated roofing material.

  2. Corrected slope and drainage so water stopped ponding.

  3. Cleaned and prepped the full surface.

  4. Sprayed a continuous foam layer.

  5. Applied an elastomeric cool roof coating built to Title 24.

  6. Broadcast granules into the coating for grip and wear.

  7. Signed a 20-year maintenance agreement and labor warranty.

The office stayed open the whole time.

In Los Angeles, the coating spec would change. Title 24 asks a low-slope commercial roof for 0.63 aged solar reflectance and 0.75 emittance when the work covers more than 50% of the roof or more than 2,000 sq ft, whichever is less. Recoats count toward that trigger. The City of LA Green Building Code asks more on the same roof: 0.68 aged reflectance, 0.85 emittance, SRI 82, once the replaced area passes 50%. A coating that passes in Buena Park can fail plan check on Melrose. We spec to the LA line on LA jobs.

See the Yamaha before and after photos

If these jobs were in Los Angeles: the code that would change

Each project above would carry at least 1 extra LA requirement. This table puts them side by side. Values come from the City of LA Green Building Code (Ordinance 187,208), Title 24 Part 6 (2025) and LAMC 91.1512. Treat the LA Green Code values as our reading of the ordinance table and confirm on your permit.

ProjectWhere it was builtLA rule that would applyWhat it changes on the bid
90,000 sq ft industrial roofLos AngelesEBEWE (20,000+ sq ft buildings)A finaled cool roof permit can count toward the no-central-cooling exemption
Paramount StudiosLos Angeles (Zone 9)Title 24 recover exception: R-10 above deckAbout 1.5 to 1.8 in of foam instead of an R-23 replacement
Yamaha officeBuena ParkLA Green Code low-slope: 0.68 / 0.85 / SRI 82Higher-reflectance coating than Title 24's 0.63
Business complexOrange CountyTitle 24 trigger: over 50% or over 2,000 sq ft, whichever is lessOn any building over 4,000 sq ft, recoating more than 2,000 sq ft trips the cool roof rule
LifeStorage facilityOrange CountyLA Green Code lists no unconditioned exemptionWritten LADBS answer before skipping the reflective spec
Invisible HouseJoshua TreeVery High Fire Hazard Severity Zone: Class A roofGypsum cover board under foam on a wood deck

We wrote the full code walk-through for commercial buildings on our spray foam roofing in Los Angeles page.

The 5-Match Reference Test: how to read any roofer's project page

A project photo proves a roofer finished a roof. It does not prove they can finish yours. Run any reference job, ours included, through these 5 matches. A reference that hits 3 or more is worth a phone call. One that hits 1 is a nice picture.

  1. Roof match. Same existing roof type as yours. In the City of LA this matters more than anywhere else we work: LAMC Table 1512.1 allows spray foam over an existing built-up roof and marks it not permitted over modified bitumen. A foam job sprayed over a torch-down cap sheet in Beverly Hills tells you nothing about a mod-bit roof in Van Nuys.

  2. Size match. Within about half to double your roof area. Crew size, rig count and staging for 90,000 sq ft look nothing like a 5,000 sq ft office.

  3. Occupancy match. Did the building stay open? Ask how the crew handled rooftop units, overspray near air intakes and tenant parking.

  4. Rulebook match. Same jurisdiction, or at least the same cool roof table. The City of LA, LA County unincorporated areas and cities like Burbank or Santa Monica each run their own permit counter.

  5. Paper-trail match. Can you verify it? LADBS online building records list City of LA permits back to 1905, so a finaled reroof permit on an LA job is public. Ask for the permit number. Then check the license at the CSLB license page.

Scored against this page: the 90,000 sq ft LA job hits size (for large buildings), occupancy and rulebook for an LA warehouse owner. The Yamaha job hits occupancy and roof type for a small office, and misses rulebook. That is why this page tells you where each job was built. Ask us for the existing-roof and thickness details on any project here and we will pull the job file.

What a 90,000 sq ft LA roof costs by path, at 2026 market rates

On a roof this size, the path you pick moves the price by hundreds of thousands of dollars. The chart applies published 2026 Southern California commercial ranges per square foot (Method Roofing Group, June 2026) to a 90,000 sq ft roof. These are market ranges, not a Vision Roof Services quote. Your number depends on the deck, the existing layers, drainage, rooftop equipment and the coating system.

Cost range for a 90,000 sq ft commercial roof in Southern California by path, 2026 Acrylic recoat $135,000 to $360,000. Silicone recoat $180,000 to $450,000. Spray foam recover $360,000 to $630,000. Full replacement $720,000 to $1,350,000 or more. Acrylic recoat Silicone recoat Spray foam recover Full replacement $135K-$360K $180K-$450K $360K-$630K $720K-$1.35M+ $0 $800K $1.35M
Bars run from the low to the high end of each range. Source: Method Roofing Group, "Roof Coating Cost in Southern California (2026)": acrylic $1.50-$4.00, silicone $2.00-$5.00, SPF $4.00-$7.00, replacement $8.00-$15.00+ per sq ft.

2 things the chart hides. A recoat only works on a roof that is still dry and still bonded, so the cheap bar is not always on the menu. And a recover inside the City of LA is limited by what is underneath, per the Table 1512.1 point above. The Health Check tells you which bars apply to your building before anyone prices anything.

Recoat or replace, and when we tell you not to spray

On a flat roof that is still dry, a recoat or recover usually beats a tear-off. You recoat a foam roof. You replace a membrane roof when it has failed. That rule saves most owners money, and we say so even when it means a smaller invoice. We also turn down foam in these cases:

  • The deck is wet. Foam over saturated insulation or decking traps the water. A core cut or moisture scan comes first, and wet sections come out.

  • The existing roof is modified bitumen inside the City of LA. LAMC Table 1512.1 marks foam over mod-bit as not permitted. We confirm the existing layers before quoting a recover.

  • The bid is price-only. Thin single-pass sprays win on price and lose the roof. We will not match a spec that skips coating thickness.

  • It is a small repair outside our core service areas. We refer those to a local roofer.

  • It is gutter cleaning. We do not do it.

Older shingle roofs on houses go a different route. See roof rejuvenation in Los Angeles for when a treatment makes sense and when it does not.

How every featured project started

Every job on this page began with a Free Roof Health Check and a written report. It is the same 9 steps on a 5,000 sq ft office or a 90,000 sq ft warehouse:

  1. First call. We ask about the building, the roof age and the leak history.

  2. Roof Health Check. We walk the roof, measure it and photograph what we find.

  3. Written report with photos, sent within 24-72 hours. You can hand it to another bidder.

  4. Proposal with the system, thickness and coating spelled out.

  5. Contract approval.

  6. Scheduling around your tenants, production days and the weather.

  7. Installation. Most projects run days to weeks depending on size.

  8. Final inspection and invoicing.

  9. Warranty and maintenance program, with annual inspections and recoat schedules.

Step 9 is where a foam roof earns its keep or fails early. The Yamaha job came with a 20-year maintenance agreement. Warranty terms on other jobs depend on the roof type and the coating system, and manufacturer-backed programs vary by system.

Who built these roofs

Dave Bienek founded Vision Roof Services in 2014 after 22 years on roofs. He started at 15 working with his father, who roofed HOA buildings, and went full-time in 1998. The company's CSLB C-39 license, #651509, was issued July 31, 1992. Today 60 roofers work under it. 12 are General Coatings certified spray foam applicators, and the company belongs to the Spray Polyurethane Foam Alliance.

The work spans Southern California, with about 7,500 jobs completed and named commercial clients including Yamaha, Paramount Studios, LifeStorage, KPRS and American Tower. Read the full story on about Vision Roof Services in Los Angeles, or see which neighborhoods we cover on areas we serve in Los Angeles.

Who calls us most: commercial building owners, property managers and HOA boards with a leak on an aging flat roof. Developers, general contractors and custom home builders come second.

Featured projects FAQ

Do you have projects in Los Angeles I can look at?

Yes. This page has 2: the 90,000 sq ft industrial foam roof and Paramount Studios. On a Health Check call we match you to the closest job on file by roof type and size, and we tell you if the closest match is outside LA.

Why show Orange County and desert projects on an LA page?

Because a roof match beats a zip code match. A 5,000 sq ft office restoration in Buena Park tells an LA office owner more than an LA warehouse does. We label every project with its real city so nobody mistakes one for the other.

Can spray foam go over my existing roof in Los Angeles?

Often, yes, if the existing roof is built-up and dry. Inside the City of LA, LAMC Table 1512.1 does not permit foam over modified bitumen, and a wet deck rules out any recover. The Health Check confirms both before we quote.

How long did these projects take?

Most of our projects run days to weeks, depending on size, the weather and how many buildings stay occupied during the work. The proposal states the schedule for your roof.

Did the buildings stay open during the work?

On the commercial jobs here, yes. The Yamaha office and the business complex both stayed in operation. Foam goes down without a tear-off, so there is no open deck exposed to rain.

Are the photos on this page real?

The project photos are ours, taken on the jobs named. 4 images on the page are illustrations, and the process ones carry a caption that says so.

Do you post prices?

Not per job. Price depends on the substrate, tear-off needs, square footage and coating system. The cost chart above gives 2026 market ranges, and your written report comes with a proposal for your roof.

More answers live on the Los Angeles roofing FAQ.

Get paid for referring a roofing project

If you know an LA building with a tired flat roof, connect us with the owner. When the job closes you get paid: $500 on purchase orders of $10,000 or more, and 5% on jobs under $10,000. The terms are on our Los Angeles referral program page.

Book a Free Roof Health Check in Los Angeles

We walk your roof, measure it, photograph what we find and send a written report in 24-72 hours. If a recoat will do, the report says so. If your roof is a match for one of the projects above, we will tell you which one and send the job file.

Vision Roof Services, Inc. 23372 Madero, Ste E, Mission Viejo, CA 92691. (949) 779-5664. CSLB C-39 #651509. Financing available through Acorn Finance.

Aerial view of a completed residential roofing project